Auxiliary Heater Used on Gasoline and Diesel Vehicles Less Turbodiesel for 1984 Mercedes-Benz 300D

Description: Heater unit.

Description: Heater unit to wheel arch.

Description: Intake muffler.

Description: (flame detection photocell).

Description: Temperature sensor.

Description: 140mm.

Description: Resistor.

Description: To 129 545 06 28. 1.0 mm2. 2.5. 1.0 mm2.

Description: 16-24mm.

Description: Electric change-over valve.

Description: Electric change-over valve.

Description: Electric change-over valve. 40-50 mm. Cooling water hose to radiator. 40-50 mm. Cooling water pipe to side member. 40-50 mm. Cooling water hose to thermostat 40 - 50mm. 40-50 mm. Hose to radiator,thermostat,and water pump. 40-50 mm. From body to blower. 40-50 mm.

Description: On heater unit bracket.

Description: M6. Bracket to water tank. Mounting parts. Control unit. Bracket mounting. Brake booster assembly to asr bracket. Fuel lines to cowl. Transistorized ignition switchgear to wheelhouse panel. Roller blind to rear panel covering, top.

Description: Alarm unit to bracket. Wiper system mounting plate to pedal assembly bracket. Exhaust pipe. On heater unit bracket. Bracket to pedal bearing bracket. At cross member below instrument panel. Front central stiffening to lighting units,left and right.

Description: Exhaust muffler. Heater unit. Heating.

Description: (tail pipe) 290 mm. (tail pipe) 440 mm.

Description: Exhaust muffler.

Description: Bz6,3x13. Bracket mounting. Control unit to the right of legroom.

Description: Electronic control box.

Description: DOOR HANDLE
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. FASTENER AT SHELL
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm.

Description: From return line to tank.

Description: Fuel feed line.

Description: Vacuum line leading from change-over valve to right main air flap element
inside diameter: 12mm
material thickness: 0,8mm. CONNECTION TO FEED PUMP 400 MM
Inside diameter: 12mm
Material thickness: 0,8mm. 300 MM
Inside diameter: 12mm
Material thickness: 0,8mm. 200mm
Inside diameter: 12mm
Material thickness: 0,8mm. FROM FUEL-OIL PUMP TO FUEL LINE 1000 MM
Inside diameter: 12mm
Material thickness: 0,8mm.

Description: From fuel-oil pump to fuel line.

Description: Fuel-oil pump. Fuel pump on cross member.

Description: Fuel-oil pump. To fuel pump.

Description: Fuel line to floor,right.

Description: Fuel line to floor,right. Fuel lines to vehicle floor. Brake line to cross member.

Description: Fuel line to floor,right.

Description: Fuel line under main floor. Brake and fuel lines to vehicle floor.

Description: Condensed water drain. Compressor-to-condenser refrigerant line to condenser. Starting cable to side member.

Description: From engine feed to piping.

Description: Hose to suction line.

Description: De-aeration valve.

Description: Heater unit outlet to de-aeration and timing valves.

Description: From pipe line to heat exchanger.

Description: From timing valve to return pipe.

Description: From valve to additional heater return line. From heat exchanger to auxiliary heater return line.

Description: From valve to additional heater return line. From heat exchanger to auxiliary heater return line.

Description: From engine to heater.

Description: (heating line),from engine to heater.

Description: Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.

Description: Bowden cable to heating feed hose. Compressor-to-condenser refrigerant line to side member. Oil pressure gauge line to speedometer drive shaft. Sensor cable 8 mm.

Description: From fuel nozzle to fuel line.

Description: Fuel-oil pump.

Description: Additional fuel pump.

Description: Electric cable to fuel tank. 15 x 5 mm. Cable harness mounting. 15 x 5 mm. Plug mounting. 15 x 5 mm. Main cable harness to front cross member. 15 x 5 mm. Cable clamp. 15 x 5 mm. Rear wiring harness fastening to roof frame. 15 x 5 mm. Line to cardboard wall. 15 x 5 mm. Electric cable to front seat cushion. 15 x 5 mm.

Description: Vacuum lines thru front panel. 10 mm. Door cable harnesses. 10 mm. For hole in firewall,bottom right. 10 mm. Piping heated rear window pane. 10 mm. Rear-end door. 10 mm. Passage. 10 mm.

Description: Brake line to fire wall. Right rear brake line to cross member. Chafe protection. Front right brake line mounting to right longitudinal member. 4,5 x 14,5 x 40. At brake line between hydraulic unit and frame bracket. To fuel line. To spring tower, left. Protection against scoring for pipe line.

Description: From heater unit to water pump.

Description: From pipe line to heat exchanger.