Wheelhouse, Front Subframe for 2013 Mercedes-Benz CL550
No.
Part # / Description / Price
Price
30
Longitudinal Member 
Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
Description: For section repair,front left.
40
MSRP $900.00
$631.80
80
140
150
160
Reinforcement Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
Description: Left wheelhouse.
MSRP $75.00
$56.07
MSRP $75.00
$56.07
195
Ball Stud Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
Description: Gas-filled strut at left to engine hood. On spring dome,right. Right wheel well. To left holder. Ball stud, gas-filled strut, left, engine hood. Pneumatic spring. Gas pressure spring to engine hood. Left longitudinal member. Right wheelhouse. Left and right.
260
Self-Tapping Screw Mercedes-Benz
Mercedes-Benz Description: To long. Member. M14x1.5-sgx75. Rear frame-type integral support. Front frame-type integral support.
MSRP $8.50
$6.63
MSRP $8.50
$6.63
270
MSRP $37.00
$28.60
280
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: Mounting plate to integral carrier. M12X1.5X25
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Steering to front frame-type integral support. Plate to frame-type integral support.
Diameter: 12mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1,5mm. Steering to front frame-type integral support. Plate to frame-type integral support.
MSRP $3.20
$2.47
MSRP $3.20
$2.47
280
MSRP $4.20
$3.25
290
Threaded Pin Mercedes-Benz
Mercedes-Benz Description: Repair solution for broken weld stud. (parts kit),line mounting. (parts kit) on left and right wheelhouses. Fuel and brake lines to main floor, left. Wheelhouse covering. Repair solution for ruptured welded pins menge nach bedarf.
MSRP $35.00
$27.30
MSRP $35.00
$27.30
300
MSRP $3.70
$2.86
305
Hexagon Nut With Flange Mercedes-Benz
Mercedes-Benz Description: Ground connection. M8
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 16mm
Width across flats: 13mm.
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 16mm
Width across flats: 13mm.
310