Description: Belt locking retractor feed-in. Speed signal. 1-pin. Cockpit cable harness. 1-pin. From electrical compartment plugconnection to indicating instruments. 1-pin. Plug connection kl 87 ug. 1-pin. Temperature sensor refrigerant indicator. 1-pin. Temperature switch,16 degs.. 1-pin. Used without automatic air conditioner. 1-pin.

Description: To 008 545 37 28. To 008 545 37 2,.

Description: Starting ignition switch. To 009 545 73 28, 011 545 45 28. To 009 545 73 28. 019 545 11 28.

Description: Combination switch plug-connection. 14-pin. 14-pole. 14-pin. Module box cable-harness plugconnection. 14-pin.

Description: Back-up lamp cable. To 007 545 00 28, 015 545 49 28. To 006 545 78 28. Fuel gauge sender unit. 4-pole to 015 545 49 28. Quadruple to 009 545 52 28. To 015 545 49 2,. Turn signal and side marker lamps left. To 009 545 52 28 (asd).

Description: 4.0mm2.

Description: Blower. 2-pin rk4. Back-up lamp cable. 2-pin rk4. To a 008 545 09 28. 2-pin rk4. To a 008 545 08 28. 2-pin rk4. Secondary air pump m33. 2-pin rk4. To 008 545 08 28/008 545 09 28. 2-pin rk4. Air injection m33. 2-pin rk4.

Description: 4,0 MM. 0.35-6.0 MM2 RK4.0
Leitungsquerschnitt Min/Max: 0,35-6,0mm2
Oberflächenschutz PINs: Ag
ELA: -
Model 1: RK
Model 2: 4.0
Release tool: W220 589 01 99 52. TO 008 545 08 28,000 821 22 26. 0.35-6.0 MM2 RK4.0
Leitungsquerschnitt Min/Max: 0,35-6,0mm2
Oberflächenschutz PINs: Ag
ELA: -
Model 1: RK
Model 2: 4.0
Release tool: W220 589 01 99 52.

Description: Hazard warning light switch;8-pole. Cable connector 8-pole.

Description: Buzzer contact;2-pole. 2-pin. Central locking system. 2-pin. Evaporator temperature sensor. 2-pin. Solenoid valve,bipolar. 2-pin. Temperature sensor;2-pole. 2-pin. Heating water valve,temperature sensor,electro-magnet valves;bipolar. 2-pin.

Description: 2.5 M. 0.35-2.5 MM2 RK2.5Leitungsquerschnitt Min/Max: 0,35-2,5mm2Oberflächenschutz PINs: AgELA: -Model 1: RKModel 2: 2.5Release tool: W220 589 01 99 30 / W220 589 01 99 53Crimp tool: W220 589 01 99 06. TO 201 540 02 81. 0.35-2.5 MM2 RK2.5Leitungsquerschni ...

Description: To 005 545 02 28. Cable harness to alternator.

Description: Warm-up sender unit,cold start valve, air-flow sensor plate contact. 0.5-1.5mm2. TO 116 540 01 81,007 545 75 28. 0.5-1.5mm2. TO 116 540 01 81/007 545 35 28. 0.5-1.5mm2. S12. 0.5-1.5mm2. TO 002 545 64 26. 002 545 82 26. 0.5-1.5mm2. Adjustment to altitude to 007 545 7528, 116 540 0181. 0.5-1.5mm2.

Description: Ground.

Description: Beam unit.

Description: Cd changer to bracket. Mounting at console. Control module mounting.

Description: Light switch.

Description: Light rotary switch.

Description: Light switch to instrument panel. Light rotary switch. Operating unit. Central covering to heater case. Air-conditioner temperature/vacuum switch to covering in case.

Description: Tube to rear pillar. Hose to right rear pillar. Main cable harness to fire wall.

Description: Engine hood upper catch to engine hood. Flap to hinge m 6x10.

Description: Ground cable to wheelhouse. Headlamp ground cable to right wheel arch panel. Headlamp ground to radiator baffle plate. Ground connection to tail lamp cable harness. License plate lamp to rear bumpen.

Description: Lower steering shaft to upper steering shaft. Shock absorber to lower control arm. Steering coupling to steering shaft. Steering coupling to steering gear. Backrest adjuster.

Description: Warning buzzer at steering lock.